USR-LG206-P Serial to LoRa Converter Introduce
USR-LG206-P is half duplex LoRa serial converter which supports point-to-point protocol.
Realize point-to-point data transmission between two serial devices by two LG206-P without any data transmission protocol.
- Supports Point to point protocol and fixed-point transmitting mode
- Long communication distance, anti-interference, high sensitivity and air waking up
- RS485 ports with EMC high level protection
Model | Frequency |
USR-LG206-P-L | 398Mhz~525Mhz |
USR-LG206-P-H | 803Mhz~930Mhz |
Parameters:
Parameter |
Value |
|
Wireless parameters |
Frequency band |
LG206-P-L:398~525MHz;
LG206-P-H: 803~930MHz |
Transmitting power |
10dBm~20dBm |
|
Receiving sensitivity |
-138.5dBm@0.268Kbps |
|
Transmission distance |
3500 meters. Test condition: Open area, clear weather, 20dBm transmitting power, 5dBi antenna gain, height is greater than 2 meters, 0.268K air rate. |
|
Antenna |
SMA |
|
Hardware parameters |
Data interface |
Serial port: Support RS232/RS485.
Baud rate: 1200bps~115200bps |
Working voltage |
5~36V |
|
Working current |
Transmitting current: 45mA@12V.
Standby mode: 12mA@12V. |
|
Working temperature |
-30℃ ~ +80℃ |
|
Storage temperature |
-45℃ ~ +90℃ |
|
Working humidity |
10~90%RH |
|
Storage humidity |
10~90%RH |
Character:
-Adopt LoRa point-to-point protocol.
-Supports fixed-point transmitting mode.
-Data encryption transmission.
-Supports RS232/RS485 interface.
-Transmission distance: 3500 meters.
-Receiving sensitivity: -138.5dBm.
-Supports AT command mode and setup software based on AT command mode.
-Supports hardware watchdog.
-5~36V power supply.
-ESD protection.
-Supports power supply anti surge.
-RS485 anti surge.
Application:
Parameter | Value |
Wireless parameters | |
Frequency band | L:398-525MHz, H:803-930MHz |
Transmitting power |
10dBm~20dBm |
Receiving sensitivity | -138.5dBm@0.268Kbps |
Transmission distance | 3500 meters. Test condition: Open area, clear weather, 20dBm transmitting power, 5dBi antenna gain, height is greater than 2 meters, 0.268K air rate. |
Antenna | SMA |
Hardware parameters | |
Data interface |
Serial port: Support RS232/RS485. Baud rate: 1200bps~115200bps |
Working voltage | 5V~36V |
Working current |
Transmitting current: 45mA@12V. Standby mode: 12mA@12V. |
Working temperature | -30℃~+80℃ |
Storage temperature | -45℃~+90℃ |
Working humidity | 10~90%RH |
Storage humidity | 10~90%RH |
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
User Manual
[User Manual]USR-LG206-P User Manual_V1.0.6.01| download
[User Manual]USR-LG206-P-transparent-transmission-mode| download
[User Manual]USR-LG206-P-point-to-point-transmission| download
[Setup Software]USR_LoRa_SET-V1.0.8.rar| download
[Setup software]ATSetup.rar| download
Product Certificate
[Certificate]LG206_CE_FCC_Certificates_and_reports_2018 | download